Car Sort Level 24 Solution Walkthrough

Two Bends, Two Phases

Orange and light blue must open the upper bend before the tall red stack moves. Purple and pink then prepare the lower bend for cyan, blue, and yellow.

Follow this order:

orange/light-blue setup -> red vertical stack -> purple top stack -> pink right path -> cyan middle row -> blue/yellow finish

Level Overview

Level 24 uses an S-shaped road through two dense parking blocks. The solve depends on opening the upper bend before forcing the lower bend.

Orange and light-blue cars travel through the upper bend first. Red then clears vertically, purple opens the upper parking slot, pink controls the right side, and cyan, blue, and yellow leave through the lower bend.

Goal

Clear both bends without allowing an upper batch and lower batch to meet in the middle of the S. The lower route should be empty before cyan begins.

Main Strategy

Start by clearing the upper bend with orange and light-blue cars. Keep the S-road open, then remove red and purple before committing to the lower cyan, blue, and yellow groups.

Step-by-Step Walkthrough

Step 1: Open The Upper Bend

Move the early orange and light-blue cars through the top part of the S-road. This creates the first safe transfer path.

Step 2: Clear The Red Vertical Stack

When red cars line up on the right side, send them out as a batch. This frees the side path for the next colors.

Step 3: Move Purple From The Top Stack

The purple stack becomes safe after red is reduced. Move purple before the lower road becomes crowded.

Step 4: Use Pink To Open The Right Path

Pink cars sit on the right and lower path. Clear them as a controlled batch so the lower bend can be used freely.

Step 5: Finish Cyan, Blue, And Yellow

After the S-road is open, complete the cyan middle row, then send the remaining blue and yellow cars through the lower exit.

Recommended Order Summary

Use this practical route:

orange/light-blue setup -> red vertical stack -> purple top stack -> pink right path -> cyan middle row -> blue/yellow finish

The exact taps may vary, but the upper bend, red/purple transition, and lower bend should clear in this order.

Key Tips

• Keep the main road or loop open before starting a deeper stack.
• Move one color batch at a time whenever possible.
• Use newly emptied slots as temporary buffers, not mixed storage.
• If the planned color is blocked, clear the car sitting directly at the road mouth first.
• Use the route references to confirm that pink has cleared the right path before cyan enters the lower S.

Why This Solution Works

The route works because the S-road is never blocked with mixed traffic. Upper-bend colors are removed first, then red and purple open the side path, and the lower colors are saved until their route is clean.