Car Sort Level 28 Solution Walkthrough

Clearing The Bridge Between Curves

Cyan and pink create space at the two side entrances. Blue then leaves the lower stack, and yellow crosses the narrow middle bridge before purple and orange use it.

Recommended order:

cyan/pink side opener -> blue lower stack -> yellow bridge -> purple center -> orange right stack -> green/red cleanup

Level Overview

Level 28 has two curved roads with side parking stacks. The early move is to open the side path with cyan and pink before moving the lower colors.

Cyan and pink open the side routes, blue moves out of the lower stacks, and yellow crosses the bridge-like middle road. Purple, orange, green, and red finish after the bridge clears.

Goal

Keep the bridge free of mixed traffic while draining both side stacks. Only one color should occupy the central crossing at a time.

Main Strategy

Open the side roads first, then use the middle bridge for one color at a time. Avoid starting orange or red too early, because they need the lower road to be clear.

Step-by-Step Walkthrough

Step 1: Open Cyan And Pink Side Routes

Move the exposed cyan and pink cars from the side stacks. This creates space on both curves.

Step 2: Move The Blue Lower Stack

After the side routes open, pull blue cars from the lower parking area. Blue needs the newly opened side path.

Step 3: Clear Yellow Across The Middle

Use the center road to transfer yellow. Yellow acts as the bridge color between the two curved roads.

Step 4: Move Purple And Orange Separately

Clear purple from the center, then move orange from the right stack. Keep these as separate batches.

Step 5: Finish Green And Red

With the middle open, send green and red through the remaining route as the cleanup phase.

Recommended Order Summary

Use this practical route:

cyan/pink side opener -> blue lower stack -> yellow bridge -> purple center -> orange right stack -> green/red cleanup

Keep the route order centered on the bridge: side openers first, one crossing color at a time, then right-side cleanup.

Key Tips

• Keep the main road or loop open before starting a deeper stack.
• Move one color batch at a time whenever possible.
• Use newly emptied slots as temporary buffers, not mixed storage.
• If the planned color is blocked, clear the car sitting directly at the road mouth first.
• Check the route references for an empty bridge after yellow and after orange.

Why This Solution Works

The route works because the side routes are opened before the lower stack is emptied. Cyan and pink create the first space, yellow clears the bridge, and the final colors move only after the roads are no longer crowded.