Car Sort Level 35 Solution Walkthrough

Video Analysis Notes

This walkthrough is based on frame sampling from the cached CherieGaming video. The analysis sheet shows the opening board around 0:05 and a near-finished board around 1:59, with the ring road almost completely clear.

Observed clearing route from the sampled frames:

upper blue/white/orange stacks -> center pink and cyan cars -> lower red/green blockers -> purple and orange bottom groups -> final red/pink/cyan cleanup

Level Overview

Level 35 is built around a square road loop. Several color groups sit inside the loop, while more groups wait in the bottom stacks. The loop can jam quickly if mixed colors are left on it.

The final sampled frame shows red, pink, cyan, orange, purple, and green grouped cleanly, which means the solve focuses on making space before pulling the bottom stacks.

Goal

Clear every car by sending each same-color group into its matching garage while keeping the main road from filling with mixed colors.

Main Strategy

Use the square loop as a passing lane. Clear upper and center cars first, then use the empty center to pull out the bottom groups.

Step-by-Step Walkthrough

Step 1: Clear The Upper Stacks

Start with the upper blue, white, and orange stacks. They are closest to the first road entrance and create the initial loop space.

Step 2: Move Pink And Cyan From The Center

After the top opens, group the pink and cyan cars from the center. Keep each color together so the loop does not fill with alternating cars.

Step 3: Remove Red And Green Blockers

Clear the red and green blockers that sit near the lower road mouth. These cars control access to the bottom stacks.

Step 4: Pull Purple And Orange From The Bottom

Once the lower route is open, move purple and orange out of the bottom stacks. Use the previously emptied center as a buffer.

Step 5: Finish Red, Pink, And Cyan

Finish the remaining red, pink, and cyan cars after the bottom stacks are no longer blocking the loop.

Recommended Order Summary

Use this practical route:

upper blue/white/orange stacks -> center pink and cyan cars -> lower red/green blockers -> purple and orange bottom groups -> final red/pink/cyan cleanup

This is a color-batch order inferred from frame changes, not an exact coordinate-by-coordinate tap list.

Key Tips

• Follow the color that is actively disappearing from the board, not just the color that looks closest.
• Keep the road mouth clear before starting a deeper stack.
• Move one color at a time whenever possible.
• If the current color is blocked, clear the immediate road blocker and then resume the detected order.
• Use the frame-analysis sheet above to compare the opening, middle, and final states.

Why This Solution Works

The route works because the square road is opened before the bottom stacks are pulled into traffic. Upper and center clears create space, lower blockers are removed next, and the remaining cars can finish in clean same-color batches.