Car Sort Level 52 Solution Walkthrough

Video Analysis Notes

The video is mostly a silent visual walkthrough, so this guide is based on frame-by-frame visual analysis of the cached CherieGaming video and the contact sheets stored in the repository. Only two sampled frames are needed because the level is a direct side-row drain.

The analysis sheet captures the starting board, one or more middle-game transitions, and the completion or near-completion state. Because the cars are small, this walkthrough describes the solution as color batches and board areas rather than pretending every tap coordinate is certain.

Observed clearing route from the sampled frames:

cyan/yellow top row -> red and yellow right rows -> blue middle cars -> green middle group -> orange right stack -> pink and purple lower rows -> final cyan/white cleanup

Level Overview

Car Sort Level 52 is a vertical left road feeding many short side rows. The main challenge is not speed; it is choosing the correct color group while the route is open.

The board can be read as three working areas:

• top cyan/yellow and red/yellow rows.
• middle pink, blue, green, and purple rows.
• right-side orange, red, green, yellow, cyan, and purple stacks.

Each row holds mixed colors, so the left road must stay clear for repeated exits. The safest solution is to open the route in layers, then use each cleared color as space for the next one.

Goal

Clear the side rows from top to bottom without clogging the left road.

Main Strategy

Do not solve this level row by row. Solve it by color priority:

1. Cyan/Yellow Top Row
2. Red And Yellow Right Rows
3. Blue Middle Cars
4. Green Middle Group
5. Orange Right Stack
6. Pink And Purple Lower Rows
7. Final Cyan/White Cleanup

This order follows the visible route shown in the video. If a listed color is temporarily blocked, clear the car sitting directly on the road mouth, then return to the same priority order.

Step-by-Step Walkthrough

Step 1: Start With Cyan/Yellow Top Row

At the beginning, focus on cyan/yellow top row. In the sampled frames, this is the first group that makes the route usable instead of just moving cars around the board. Tap only the exposed cars in this group and let them leave before starting a different color.

Step 2: Keep Clearing Cyan/Yellow Top Row Until The Route Opens

Continue with cyan/yellow top row until the first road mouth or loop section is clearly open. This is the first turning point of Level 52: once this group leaves, the board has enough space to receive the next color batch without mixing traffic.

Step 3: Switch To Red And Yellow Right Rows

After the opening space appears, move into red and yellow right rows. Keep this as a controlled batch. If one car from that group is still buried, do not force it; clear the car sitting directly in front of it first.

Step 4: Release Blue Middle Cars

The next useful layer is blue middle cars. These cars are not the best opening move because they depend on the first route being open. Once they are exposed, send them together so they do not split across the road.

Step 5: Return To Green Middle Group

When the middle opens, shift to green middle group. This is where the board starts to resemble the later sampled frames. Use the empty spaces from the earlier colors as a temporary buffer, not as mixed storage.

Step 6: Clear Orange Right Stack

Clear orange right stack next. This step removes the cars that control the main road turn and usually exposes the lower or side stacks. Keep watching the route entrance; if it fills, pause the current color and remove the immediate blocker.

Step 7: Move Pink And Purple Lower Rows

Now move pink and purple lower rows. These cars are deeper in the layout, so they are safest after the upper and middle colors have already created room. Send them in a single batch whenever possible.

Step 8: Use The New Buffer For Final Cyan/White Cleanup

Use the new buffer for final cyan/white cleanup. The video pattern shows the route becoming easier at this point because each completed color has turned into extra working space.

Step 9: Finish The Last Large Color Group

Finish the last large color group as the board enters the cleanup phase. Do not scatter taps across every visible car; finish one group, then use the empty lane for the next group.

Step 10: Send The Final Cars Directly

Near the end, send the final visible cars directly to their matching garages. By this stage, the main blockers from cyan/yellow top row, red and yellow right rows, and blue middle cars should already be gone.

Step 11: Confirm The Board Is Cleared

The level completes once the final same-color batch reaches its garage. If your board does not match the final sampled frame, look for one mixed car sitting at the road mouth; that is usually the piece preventing the last transfer.

Recommended Tap Order Summary

Use this color priority:

1. Cyan/Yellow Top Row
2. Red And Yellow Right Rows
3. Blue Middle Cars
4. Green Middle Group
5. Orange Right Stack
6. Pink And Purple Lower Rows
7. Final Cyan/White Cleanup

This is a color-batch order inferred from frame changes, not an exact coordinate-by-coordinate tap list.

Key Tips for Level 52

• Clear exposed cars first; do not dig into blocked rows too early.
• Work by color groups instead of random taps.
• Use cyan/yellow top row as the opening route because it creates the first usable space.
• Do not force final cyan/white cleanup until the middle or lower route is open.
• Keep one road lane, loop segment, or empty stack available as a working buffer.
• If the road looks crowded, stop tapping new colors and clear the immediate road-mouth blocker.
• Use the frame-analysis sheet above to compare your opening, middle, and final board states.

Why This Solution Works

Level 52 is built around chained blockers. Cyan/Yellow Top Row opens the first route. Red And Yellow Right Rows expands the working space. Blue Middle Cars and Green Middle Group then remove the cars that were hiding the lower or side stacks. By the time the final cars are exposed, the board has enough empty space to finish without mistakes.

The level becomes much easier when you treat each color as a batch and avoid sending a car before its matching route is ready.