Car Sort Level 61 Solution Walkthrough

Video Analysis Notes

The video is mostly a silent visual walkthrough, so this guide is based on frame-by-frame visual analysis of the cached CherieGaming video and the contact sheets stored in the repository. The video is much shorter than the others; only the final board state and win sequence are visible in the sampled frames.

The analysis sheet captures the starting board, one or more middle-game transitions, and the completion or near-completion state. Because the cars are small, this walkthrough describes the solution as color batches and board areas rather than pretending every tap coordinate is certain.

Observed clearing route from the sampled frames:

visible top blockers -> remaining center cars -> last lower stack -> final direct garage transfers

Level Overview

Car Sort Level 61 is a very short video segment with a mostly solved board and completion screen. The main challenge is not speed; it is choosing the correct color group while the route is open.

The board can be read as three working areas:

• a nearly complete vertical stack.
• a small remaining lower set.
• the completion screen immediately after the final transfer.

The available cached clip shows only the end of the solve, so the guide focuses on the visible finish pattern. The safest solution is to open the route in layers, then use each cleared color as space for the next one.

Goal

Finish the remaining visible cars cleanly.

Main Strategy

Do not solve this level row by row. Solve it by color priority:

1. Visible Top Blockers
2. Remaining Center Cars
3. Last Lower Stack
4. Final Direct Garage Transfers

This order follows the visible route shown in the video. If a listed color is temporarily blocked, clear the car sitting directly on the road mouth, then return to the same priority order.

Step-by-Step Walkthrough

Step 1: Start With Visible Top Blockers

At the beginning, focus on visible top blockers. In the sampled frames, this is the first group that makes the route usable instead of just moving cars around the board. Tap only the exposed cars in this group and let them leave before starting a different color.

Step 2: Keep Clearing Visible Top Blockers Until The Route Opens

Continue with visible top blockers until the first road mouth or loop section is clearly open. This is the first turning point of Level 61: once this group leaves, the board has enough space to receive the next color batch without mixing traffic.

Step 3: Switch To Remaining Center Cars

After the opening space appears, move into remaining center cars. Keep this as a controlled batch. If one car from that group is still buried, do not force it; clear the car sitting directly in front of it first.

Step 4: Release Last Lower Stack

The next useful layer is last lower stack. These cars are not the best opening move because they depend on the first route being open. Once they are exposed, send them together so they do not split across the road.

Step 5: Return To Final Direct Garage Transfers

When the middle opens, shift to final direct garage transfers. This is where the board starts to resemble the later sampled frames. Use the empty spaces from the earlier colors as a temporary buffer, not as mixed storage.

Step 6: Clear The Middle Blockers

Clear the middle blockers next. This step removes the cars that control the main road turn and usually exposes the lower or side stacks. Keep watching the route entrance; if it fills, pause the current color and remove the immediate blocker.

Step 7: Move The Lower Group

Now move the lower group. These cars are deeper in the layout, so they are safest after the upper and middle colors have already created room. Send them in a single batch whenever possible.

Step 8: Use The New Buffer For The Remaining Side Cars

Use the new buffer for the remaining side cars. The video pattern shows the route becoming easier at this point because each completed color has turned into extra working space.

Step 9: Finish The Last Large Color Group

Finish the last large color group as the board enters the cleanup phase. Do not scatter taps across every visible car; finish one group, then use the empty lane for the next group.

Step 10: Send The Final Cars Directly

Near the end, send the final visible cars directly to their matching garages. By this stage, the main blockers from visible top blockers, remaining center cars, and last lower stack should already be gone.

Step 11: Confirm The Board Is Cleared

The level completes once the final same-color batch reaches its garage. If your board does not match the final sampled frame, look for one mixed car sitting at the road mouth; that is usually the piece preventing the last transfer.

Recommended Tap Order Summary

Use this color priority:

1. Visible Top Blockers
2. Remaining Center Cars
3. Last Lower Stack
4. Final Direct Garage Transfers

This is a color-batch order inferred from frame changes, not an exact coordinate-by-coordinate tap list.

Key Tips for Level 61

• Clear exposed cars first; do not dig into blocked rows too early.
• Work by color groups instead of random taps.
• Use visible top blockers as the opening route because it creates the first usable space.
• Do not force final direct garage transfers until the middle or lower route is open.
• Keep one road lane, loop segment, or empty stack available as a working buffer.
• If the road looks crowded, stop tapping new colors and clear the immediate road-mouth blocker.
• Use the frame-analysis sheet above to compare your opening, middle, and final board states.

Why This Solution Works

Level 61 is built around chained blockers. Visible Top Blockers opens the first route. Remaining Center Cars expands the working space. Last Lower Stack and Final Direct Garage Transfers then remove the cars that were hiding the lower or side stacks. By the time the final cars are exposed, the board has enough empty space to finish without mistakes.

The level becomes much easier when you treat each color as a batch and avoid sending a car before its matching route is ready.