Car Sort: Color Puzzle Level 813 Solution Walkthrough
Route Reference
Key opening, middle, and finish positions for this route.

A Box Road With Gates Above And Below
Level 813 uses a large square loop as its central road. One tall stack feeds from above, and three long numbered bars cross the upper interior. The lower half is packed with narrow color columns, with another set of numbered stacks along the bottom edge. This is a two-ended board: the upper feeder opens the top of the loop while the bottom stacks remain a later cleanup zone.
At the opening, both the upper bars and lower columns are dense, so keep the first moves focused on the exposed fronts. As the upper bars and central columns shrink, watch for cars beginning to appear along the lower edge; that is the point to switch attention downward without abandoning the center. Near the finish, several bottom stacks are empty and the remaining lower groups can move into place. When two small colors are hard to tell apart, follow the exposed group and the space it releases rather than guessing a color order.
Begin With The Upper Feeder
The top stack sits directly above the loop and can feed the upper crossbars. Start with its visible front when a matching destination is ready, then check what the first move exposes. The bars are numbered and layered; clear the accessible front of a bar before reaching behind it. Opening multiple bars together creates competing fronts along the top of the same square route.
The upper bars are the early release point, not a place to keep cycling back to throughout the entire puzzle. Reduce the first accessible row enough to free the top junction, then turn attention to the central columns it exposed. If an upper bar reveals an unusable color, leave it until a center batch has cleared and made another destination available.
Work The Central Grid Without Feeding Both Ends
The center is the largest sorting area. Several tall columns stand side by side, and their fronts change as the numbered bars above are emptied. Clear a column only as far as the next front can be handled safely. A completed column opens road space around both sides of the loop; a half-open column can still obstruct the route even when its top color is gone.
The bottom numbered stacks are visible from the start, but the middle frames show why they should wait: cars are still moving through the central grid and the lower turn. Continue clearing the center group that currently occupies that junction. Once the lower approach is open, feed a bottom stack whose next color can be completed rather than exposing all three bottom stacks in one run.
Bottom Transfer And Finish
The late section shifts toward the bottom edge. Move the exposed bottom groups one at a time, using the square loop as a transit lane and not as a parking queue. The left, middle, and right stacks each have a distinct entry point. Choose the one with a clear route first, then reassess the other two after the batch has left the road.
Keep the center columns closed once they are no longer needed. Their remaining fronts can be tempting, but reopening the grid while bottom groups are in transit adds traffic at the exact point where the loop narrows. The completion state follows the bottom cleanup, so save the final road space for whichever stack remains rather than spending it on an optional exposed front.
If A Gate Or Column Gets Ahead Of You
If the loop is crowded, stop releasing cars from both the upper and lower ends. Finish the batch already in transit, then continue from the nearest open front. If a numbered bar was opened early, clear a center column that can finish before feeding that bar again. When replay progress is hard to match, use three landmarks: top bars reduced, central grid opening, bottom stacks entering the loop.
This Level 813 walkthrough is about managing two entry zones around one large loop. Clearing the upper feeder first and holding the bottom stacks until the central grid opens keeps those entry streams from colliding at the lower turn.