Car Sort Walkthrough

Car Sort: Color Puzzle Level 143 Solution Walkthrough

⏱️ 4:14📅 2026-07-06🎬 CherieGaming
Share:

Route Reference

Key opening, middle, and finish positions for this route.

Car Sort: Color Puzzle Level 143 route reference

Sparse Loop, No Buffer

Level 143 is a minimal loop with tall roof garages and almost no side pockets. Yellow and gray must clear those garages before blue can occupy the loop.

Purple waits below blue. Green and pink become safe only after both earlier groups have left the single shared lap.

Board Route

Use the first seconds to clear the yellow and gray cars near the top garages first, then open the left side of the loop. Do not spend that space immediately on a different color.

Then move the blue group through the loop before touching the purple lower cars. The video keeps the lane clean here, which is why the later cars do not jam.

Finish with green and pink as the last low-risk batches once the loop is empty. Their route is short only because blue and purple were kept separate.

Step Guide

  1. Clear Yellow Top-garage Cars before touching the deeper stacks.
  2. Use Gray Top-garage Cars to extend the first open lane.
  3. Switch to Blue Loop Group when the center of the board has room.
  4. Follow with Purple Lower Cars as a full batch, not as scattered single taps.
  5. Release Green Side Cars after the side or lower route is stable.
  6. Let Pink Final Cars close the level once the road is mostly empty.

Route Snapshot

yellow top-garage cars -> gray top-garage cars -> blue loop group -> purple lower cars -> green side cars -> pink final cars

Before purple, no blue car should remain on either vertical side. Before green, the complete loop should be empty.

Avoid This Mistake

Because the board is sparse, one mixed car can block its only path. Finish the color already on the loop and leave every covered side group closed.

Why It Works

Yellow/gray clear the roof, blue opens the loop, and purple removes the lower pressure point. Green and pink can then travel as short, uncontested final groups.

One Full Lap At A Time

The small loop should become completely empty after yellow/gray, after blue, and after purple. These three pauses replace the buffer spaces found on larger boards.

If blue stops, check both roof garages for the last yellow or gray car. If purple stops, finish blue before touching green. Green then clears the side position and leaves the final lap to pink. Do not expose a covered lower group to create room; there is nowhere for an extra color to wait. Completing the batch already on the road is the only reliable recovery, and it usually returns the board to the same empty-loop checkpoint.

At the final checkpoint, both tall roof garages and the lower purple position should be quiet before pink starts.