Car Sort: Color Puzzle Level 332 Solution Walkthrough

Empty the three internal shelves

The shelves expose orange and purple on top, yellow and green in the middle, then green and blue at the bottom. Start with orange because it controls the upper-right corner. Purple follows across the top shelf. Clear yellow next, then the exposed green batch.

Use this route reference:

orange → purple → yellow → green middle → blue lower shelf → red side column → lower blue/green reserves → top yellow/cyan/red/pink towers → purple and orange cleanup

Blue should not enter until the green shelf is complete. Both colors leave through the same lower-left turn, and alternating them removes the buffer needed for the side column.

Opening-state checkpoints

The three internal shelves should disappear in a visible sequence. Orange and purple empty the upper shelf, yellow and green reduce the middle, and blue clears the lower approach. Red on the right side is the final opening blocker. If your board shows cars from the covered bottom row before red is complete, pause the reserve and restore this order.

The bottom-left road cell is a reliable warning light. It should be empty between batches. A marker parked there means the previous shelf color has not completed and the next cover should remain untouched.

Release the lower row

After blue clears, move red from the right-side column. Red opens access to the covered row beneath the road. The lower reserves reveal blue on the far left, then red, yellow, pink, and green across the remaining columns. Take the fully exposed blue group first and then green when its cover lifts; handle the center colors according to the counter currently shown above the board.

Keep the bottom-left road cell free after every batch. That cell is where the tall top reserves eventually reconnect with the outside loop.

Clear the lower row as columns, not a rainbow

Although several reserve faces become visible together, each column needs a complete turn. Blue uses the left entrance and creates the first buffer. Red and yellow occupy the central connections and should follow whichever counter is active. Pink approaches from the right, while green is safest once one middle column has emptied.

Do not tap one car from every visible column. That creates alternating road markers and blocks the very bottom-left cell needed for the chained top towers. A correct lower phase shows a single solid color travelling around the rectangle at any time.

Unlock the chained top towers

The top row expands into yellow, pale cyan, dark red, and pink towers. Yellow is safest first because its garage has already been reduced by the opening middle shelf. Clear pale cyan next, then red. Pink should wait until red has left the right edge; their exits are adjacent and a mixed queue there blocks the loop.

Purple reappears across the upper internal shelf during cleanup. Finish it as a complete row, then clear the final orange group at the bottom of the inner stack. Green may be the last reserve column still visible; by now it has a direct road to its garage.

Confirm each tower release

Yellow should leave the top row while the left edge is clear. Pale cyan follows through the space yellow creates. Dark red needs the upper-right bend, so complete cyan first, and save pink for the clean late pass. If the replay state shows a tower face and an inner shelf face of the same color, clear the inner one first because it occupies the shared road entrance.

After the fourth tower shrinks, the internal shelves should form broad purple and orange bands. These are the final structural blockers, not optional leftovers. Clear purple from the upper band before orange below it, then inspect the bottom row for the last green column.

If the top chains remain closed, one of orange, purple, yellow, green, blue, or red is incomplete inside the rectangle. If the bottom row jams, finish the leftmost active reserve before opening the next cover. When pink is stuck at the top-right, clear red from the same edge rather than sending another color around the loop.

Recovery checkpoints

For a single misplaced lower car, find the reserve column with the same exposed face and complete it. If the stranded car is at the top, finish the active yellow, cyan, red, or pink tower. Avoid searching for a matching car behind another cover; opening more columns removes the buffer needed for recovery.

Restart only when the bottom-left cell and the upper-right bend are occupied by different incomplete colors and neither source face is currently reachable. Otherwise, completing the color nearest its garage normally restores one empty corner and returns the board to the intended tower sequence.

Level 332 works by using the compact center as temporary space. The six opening batches empty it, the lower row pays down the tower locks, and the tall yellow, cyan, red, and pink reserves then move through a rectangular road that no longer has competing shelf traffic or covered exits. Keep every corner visibly open during that final rotation.

For the final pass, verify that every top chain has disappeared and that the five bottom bays no longer show an exposed complete column. The remaining purple, orange, or green group should be the only active color. If a counter is still visible, trace its matching face before starting cleanup. This final inspection is faster than recovering from a late mixed queue and keeps the last route around the rectangle direct.

The upper-right corner is the final danger point. Wait until its red or pink marker vanishes completely, then allow the surviving inner-shelf color to make an uninterrupted lap.