Car Sort: Color Puzzle Level 339 Solution Walkthrough

Read the stacked center shelves

The opening center presents yellow on the upper shelf, purple below it, red across the third band, and green with cream on the bottom. These rows control the first counter. Clear them from top toward the lower road so every new band inherits the space created by the one above.

Use this route reference:

yellow upper shelf → purple band → red band → green lower-left → cream lower-right → first bottom-cover release → pink lower column → upper red/green/blue/orange tower layers → second bottom release → cyan/purple/cream cleanup

Do not combine a tower color with a matching center color unless both are already exposed and the road is empty. The identical colors belong to different release stages and enter at opposite corners.

Open the square from the top shelf

Move yellow first. Its shelf sits closest to the top road, and completing it clears the upper-right corner for purple. Purple should leave as one broad row. Red follows only after purple markers have disappeared from the left edge.

Clear red across the center, then move green from the lower-left shelf. Cream is the last opening color and uses the lower-right connection. If cream begins before green finishes, the bottom edge fills with two batches and the diamond covers cannot release cleanly.

The correct first checkpoint shows four mostly dark center shelves and all four road corners open. Some lower covers may begin moving, but wait until the last cream car reaches its garage.

Use the first lower cover as a buffer

The lower row does not open all at once. A pink column appears first near the left-center. Clear it immediately while the square is empty. A dark or brown face may appear in an adjacent bay; take it only when the full column is exposed.

Completing the first lower column reduces the chain on the upper towers. Do not tap across the remaining diamond covers. Their visible gems indicate future releases, not currently usable parking spaces.

Drain the changing upper tower faces

The top towers move through red, green, blue, orange, pale cyan, purple, and cream layers. Follow the complete face nearest the open road. Red and green use the left half of the square; blue and orange need the right side. Keep those pairs separate.

After a tower face completes, look at the lower covers before starting another top color. A newly released bottom column can occupy the same corner as the next tower. If the bottom face is fully exposed and its counter is active, clear it first; otherwise continue with the next tower layer.

The replay shows the upper row changing from dark capped stacks into solid colored towers. Let one solid column finish before moving to its neighbor. Alternating between towers removes the empty top corner that makes the square usable.

Check the tower-to-cover handoff

After every second tower face, inspect the four lower covers. A released face should form a complete vertical group, while the other bays remain visibly covered or dark. Clear that complete group before continuing above only when its entrance corner is empty. If a tower marker still occupies the same side, finish the tower first.

This decision keeps the board from becoming a race between top and bottom traffic. The square has plenty of road length but only four corners, and each active source consumes one of them. A clean handoff leaves at least three corners empty before the next column enters.

Complete the second lower release

The later bottom bays expose cyan on the left, purple in the middle, and cream or brown toward the right. Clear cyan first because it has the cleanest left entrance. Purple follows through the space cyan creates. Save the right-side cream batch until no orange tower marker remains above.

Green may return in a deep lower face. If it is fully exposed, complete it before the final cream group. By this stage the center shelves are empty and every bottom column should have a direct route.

Recovery checkpoints

If the top road jams, finish yellow, purple, red, or the active tower color. A blockage on the bottom edge points to green, cream, pink, cyan, or purple from the lower releases. Use the car's road position to choose the correct source instead of opening a same-colored face on the opposite side.

If a diamond cover remains closed, inspect the center shelves and the currently active tower counter. One incomplete batch is still paying for that cover. Do not tap another locked bay. A single misplaced car is usually recoverable by completing its exposed group and waiting for one corner to empty.

Restart only when two partial colors occupy opposite corners and neither matching source is visible. Otherwise, finish the batch closest to its garage and resume at the last cover or tower transition.

Level 339 succeeds by alternating controlled releases around an empty center. The opening shelves create the square-road buffer, the first lower column unlocks the towers, tower layers expose the remaining bottom bays, and the final cyan, purple, and cream groups finish without center traffic.

For the final completion check, the four center shelves should be dark, all diamond covers should be gone, and the top row should show no colored tower face. If one condition is missing, finish that area's exposed batch before starting the last cream group. The last color should make an uninterrupted circuit with no pause at a corner.

If cream enters from the right, keep the lower-right bend completely bare. A leftover cyan marker at that bend signals that the second lower release has not actually finished.